English
Slovenski
Hrvatski
€826.50
€870.00
The aluminium cutter head is suitable for use on four-side moulders.
Cutter heads and knifes
Subcategories
€730.84
€769.30
The CMT 694.015 cutter head is used for making conventional solid interior doors with thickness up to 48 mm.
€585.10
€615.90
The CMT 2-piece adjustable cutter head with HW blades enables the processing of workpiece along two edges simultaneously at a 45° angle with different radii and on a flat surface between both edges at a width of 18 to...
€561.45
€591.00
The professional adjustable chamfer cutter head with gear box with two interchangeable HW blades for cutting workpieces at an angle ranging from 0° to ± 90°. The blades can be rotated at intervals of 7.5°.
€428.35
€450.90
The CMT adjustable 3-piece groove cutter with interchangeable HW blades for making grooves with the height of 4 to 15 mm. The cutter head has a diameter of 140 mm and an adjustable height ranging from 4 to 15 mm and a...
€344.66
€362.80
The CMT 693 cutter head set with interchangeable HSS blades is intended for processing solid wood for manual and machine feeding. The router has a diameter of 100 mm, the height of 40 mm and a borehole diameter of 30...
€288.61
€303.80
The CMT 694.013 cutter head is used for making fillers for kitchen cabinet doors and similar.
€271.32
€285.60
The CMT cutter head for making the external radiuses of R 15 mm and R 20 mm.
€264.96
€278.90
The CMT 694.011 cutter head is used for making a corner joint at a 45° angle with a middle bond.
€259.07
€272.70
The CMT adjustable grooving cutter head with interchangeable HW blades for making grooves ranging from 20 to 39 mm. The cutter head has a diameter of 170 mm and an adjustable height ranging from 20 to 39 mm and a...
€255.55
€269.00
The STARK adjustable 2-piece groove cutter with interchangeable HW blades for making grooves with the height of 4 to 7.5 mm.
€255.46
€268.90
The CMT 694.014 cutter head set is used for making cabinet doors with thickness ranging from 22 to 25 mm.
€254.50
€267.90
The CMT cutter head for making the internal and external radiuses of R 10 mm.
€240.73
€253.40
The CMT adjustable grooving cutter head with interchangeable HW blades for making grooves ranging from 14 to 27 mm. The cutter head has a diameter of 150 mm and an adjustable height ranging from 14 to 27 mm and a...
€219.16
€230.70
The CMT cutter head for making the external radiuses of R 5 and R 10 mm.
€214.61
€225.90
The aluminium cutter head – the planer head with HW interchangeable blades for flush trim cutting of small radiuses.
€212.42
€223.60
The CMT 694.009 cutter head is used for making a profile for edge gluing of solid wood with thickness ranging from 15 to 38 mm.
€209.67
€220.70
The CMT cutter head with interchangeable HW blades for processing solid wood, wood composites and PVC material at a 45° angle up to the height of 35 mm. The cutter head has a borehole diameter of 30 mm or 35 mm, and...
€196.08
€206.40
The thinnest groove router by the Italian blade manufacturer STARK. Using this cutter, you can make grooves with widths ranging from 2.5 to 4.8 mm and depths of up to 15 mm.
€181.07
€190.60
The CMT universal rabbeting cutter head with interchangeable HW blades and the possibility of clamping HSS blades with the width of 40 mm allows the choice between 160 different blade profiles. It is intended for...
€170.71
€179.70
The CMT rabbeting cutter head with interchangeable HW blades is intended for manual and machine feeding. The cutter head has a diameter of 100 mm, the height of 51 mm and a borehole diameter of 30 mm or 35 mm.
€165.78
€174.50
The cutter head has brazed HW blades, which are sharpened at an angle of 45° and intended for processing solid wood and wood composite materials. The cutter has a borehole diameter of 30 or 35 mm.
€147.25
€155.00
The cutter head has brazed HW blades, which are sharpened at an internal angle and intended for processing solid wood and wood composite materials. The cutter has a borehole diameter of 30 or 35 mm.
€143.36
€150.90
The CMT cutter head with interchangeable HSS blades is used for processing solid wood. The cutter head has a diameter of 100 mm, the height of 40 mm and a borehole diameter of 30 or 35 mm.
€142.60
€150.10
The CMT cutter head with interchangeable HSS blades is used for processing solid wood for manual and machine feeding. The cutter head has a diameter of 100 mm, the height of 40 mm and a borehole diameter of 30 or 35 mm.
€134.90
€142.00
The cutter head has brazed HW blades, which are sharpened at an internal angle and intended for processing solid wood and wood composite materials. The cutter has a borehole diameter of 30 or 35 mm.
€133.38
€140.40
The CMT cutter head with interchangeable HSS blades is used for processing solid wood. The cutter head has a diameter of 100 mm, the height of 40 mm and a borehole diameter of 30 or 35 mm.
€91.20
€96.00
The cutter head has brazed HW blades, which are sharpened at an external angle and intended for processing solid wood and wood composite materials. The cutter has a borehole diameter of 30 or 35 mm.
Showing 29-56 of 273 item(s)
