English
Slovenski
Hrvatski
€730.84
€769.30
The CMT 694.015 cutter head is used for making conventional solid interior doors with thickness up to 48 mm.
Cutter heads
€585.10
€615.90
The CMT 2-piece adjustable cutter head with HW blades enables the processing of workpiece along two edges simultaneously at a 45° angle with different radii and on a flat surface between both edges at a width of 18 to...
€561.45
€591.00
The professional adjustable chamfer cutter head with gear box with two interchangeable HW blades for cutting workpieces at an angle ranging from 0° to ± 90°. The blades can be rotated at intervals of 7.5°.
€529.15
€557.00
The FREUD TD60M cutter head is used for making door frames with rounded profile.
€479.37
€504.60
The adjustable chamfer cutter head STARK with two interchangeable HW blades for cutting workpieces at an angle ranging from 0° to ± 70°. The blades can be rotated at intervals of one degree.
€428.35
€450.90
The CMT adjustable 3-piece groove cutter with interchangeable HW blades for making grooves with the height of 4 to 15 mm. The cutter head has a diameter of 140 mm and an adjustable height ranging from 4 to 15 mm and a...
€416.10
€438.00
The FREUD TD61M cutter head is used for processing external edges for furniture doors.
€379.33
€399.30
The adjustable chamfer cutter head with positive stop with two interchangeable HW blades for cutting workpieces at an angle ranging from 0° to ± 45°. The blades can be rotated at intervals of 7.5°.
€306.66
€322.80
The CMT 692 cutter head set with interchangeable HSS blades is intended for processing solid wood. The cutter head has a diameter of 100 mm, the height of 40 mm and a borehole diameter of 30 mm.
€306.66
€322.80
The CMT 692 cutter head set with interchangeable HSS blades is intended for processing solid wood. The cutter head has a diameter of 100 mm, the height of 40 mm and a borehole diameter of 35 mm.
€306.66
€322.80
The CMT 692 cutter head set with interchangeable HSS blades is intended for processing solid wood. The cutter head has a diameter of 100 mm, the height of 40 mm and a borehole diameter of 30 mm.
€306.66
€322.80
The CMT 692 cutter head set with interchangeable HSS blades is intended for processing solid wood. The cutter head has a diameter of 100 mm, the height of 40 mm and a borehole diameter of 35 mm.
€288.61
€303.80
The CMT 694.013 cutter head is used for making fillers for kitchen cabinet doors and similar.
€277.30
€291.90
The CMT 694.012 cutter head is used for making fillers for kitchen cabinet doors and similar.
€271.32
€285.60
The CMT cutter head for making the external radiuses of R 15 mm and R 20 mm.
€264.96
€278.90
The CMT 694.011 cutter head is used for making a corner joint at a 45° angle with a middle bond.
€255.46
€268.90
The CMT 694.014 cutter head set is used for making cabinet doors with thickness ranging from 22 to 25 mm.
€254.50
€267.90
The CMT cutter head for making the internal and external radiuses of R 10 mm.
€219.16
€230.70
The CMT cutter head for making the external radiuses of R 5 and R 10 mm.
€212.42
€223.60
The CMT cutter head for edge jointing of wood up to the thickness of 47 mm. It is intended for manual and machine feeding.
€212.42
€223.60
The CMT 694.009 cutter head is used for making a profile for edge gluing of solid wood with thickness ranging from 15 to 38 mm.
€209.67
€220.70
The CMT cutter head with interchangeable HW blades for processing solid wood, wood composites and PVC material at a 45° angle up to the height of 35 mm. The cutter head has a borehole diameter of 30 mm or 35 mm, and...
€193.80
€204.00
The STARK adjustable 2-piece groove cutter with HW blades for making grooves with the height of 1.8 to 3.4 mm.
€185.25
€195.00
The OMAS cutter head has interchangeable HW blades, and is used on the four-side moulders. It serves us as a scoring saw blade before moulding the right-hand side of the workpiece.
€181.07
€190.60
The CMT rabbeting cutter head with interchangeable HM blades is intended for manual and machine feeding. The router has a diameter of 125 mm, the height of 51 mm and a borehole diameter of 50 mm.
€181.07
€190.60
The CMT universal rabbeting cutter head with interchangeable HW blades and the possibility of clamping HSS blades with the width of 40 mm allows the choice between 160 different blade profiles. It is intended for...
€170.71
€179.70
The CMT rabbeting cutter head with interchangeable HW blades is intended for manual and machine feeding. The cutter head has a diameter of 100 mm, the height of 51 mm and a borehole diameter of 30 mm or 35 mm.
€135.60
€271.20
Top-quality profile milling head with interchangeable HM blades. The milling head is made of steel and has a diameter of 160 mm, a height of 35 mm and a BOREHOLE of 40 mm.
Since most milling machines do not have a...
Showing 1-28 of 51 item(s)
