English
Slovenski
Hrvatski
Prodeco E70 Vertical briquetting press with a 7.5 kW motor, 70 mm briquette diameter and output from 50 to 120 kg/h.
Briquetting machine Prodeco E80 Vertical
Brand:
Prodeco E80 Vertical briquetting press with an 11 kW motor, 80 mm briquette diameter and output from 90 to 220 kg/h.
The Vertical series hydraulic briquetting press suits several solutions: it can be placed under a dust collector or under a wood waste silo. The hopper can be modified to the customer’s wishes.
The E80 Vertical has hopper dimensions of 1200 x 1200 mm at the bottom and 1880 x 1880 mm at the top, with a height of 1030 mm.
Material is fed from the hopper to the press by a screw conveyor.
Briquette quality and output depend on the type of material and its moisture.
Machine features:
- 7 pressing cycles per minute at full load,
- 3 hydraulic cylinders,
- maximum length of each stroke 70 mm,
- hopper dimensions 1200 x 1200 mm at the bottom, 1880 x 1880 mm at the top, height 1030 mm,
- hopper base equipped with a flap for loading material into the screw,
- automatic adjustment of material loading,
- automatic shut-off when all material is used,
- electronic pressure gauges on the pump and cylinders,
- Siemens touch screen,
- preheating system,
- oil temperature and level probe,
- flat head,
- maximum recommended material moisture 15%.
Data sheet
- Motor power (kW)
- 11
- Briquette diameter (mm)
- 80
- Weight (kg)
- 1500
- Machine external dimensions (LxWxH)
- 2000 x 1500 x 1600 mm
Related products
Prodeco E60 Vertical briquetting press with a 5.5 kW motor, 60 mm briquette diameter and output from 27 to 70 kg/h.
AECO briquetting presses with motors from 4.4 kW to 9.3 kW. Four models are available with output of 30, 50, 70 and 100 kg/h.
The Fabbri F55 heater is designed for supplementary heating of premises such as warehouses, joinery workshops, etc. up to 250 m2. It works by blowing hot air into the room through distribution ducts.
Fabbri heaters are designed for supplementary heating of larger premises such as warehouses, industrial halls, joinery workshops, etc. up to 350 m2. They work by blowing hot air into the room through distribution ducts.
€2,915.80
The heaters are designed for supplementary heating of production halls, warehouses, joinery workshops,... They work by blowing hot air into the room through distribution ducts.
