English
Slovenski
Hrvatski
The Fabbri F55 heater is designed for supplementary heating of premises such as warehouses, joinery workshops, etc. up to 250 m2. It works by blowing hot air into the room through distribution ducts.
Hot air generator FA28
Brand:
The heaters are designed for supplementary heating of production halls, warehouses, joinery workshops,... They work by blowing hot air into the room through distribution ducts.
Call for price
Condition
New product
Hot air generator F28
Suitable for rooms up to 150 m2 or 500 m3.
The heater is used mainly for supplementary heating of workshops, production halls or warehouses. The advantage of the system is fast room heating – once lit, the room warms up in less than 30 minutes.
It can burn solid fuels such as wood waste, shavings, briquettes, chips,...
WHY CHOOSE A HOT AIR GENERATOR?
- Low initial investment
- No radiators or plumbing needed
- Can burn wood waste, shavings and briquettes
- Much lower heating costs compared to heating oil or gas
- The room warms up very quickly
- Heat can be transferred to other rooms by extending the outlet ducts!
HEATERS AVAILABLE IN VARIOUS SIZES:
28 kW / 55 kW / 85 kW / 120 kW / 240 kW / 350 kW
For all information and an immediate offer, call or email us:
+386 1 561 05 30 or info@lestroj.si
PARTS
01 – Hot air outlet ducts/nozzles
02 – Upper combustion chamber door
03 – Lower combustion chamber door for cleaning the firebox before reuse
04 – Welded iron grate in the firebox
05 – Protective grille on the fresh air fan
06 – Programmer for switching the blower on/off
07 – Upper cover of the heating chamber for easier cleaning
08* – Draught fan for forced extraction of flue gases. It provides faster fresh air supply, enabling faster combustion.
*The draught fan is fitted as standard on heaters from F120 upwards. For heaters 28 / 55 / 85 it can be ordered at extra cost.
Data sheet
- Motor power (kW)
- 0,26
- Power (kW)
- 29
- Air flow (m3/h)
- 2200
- Weight (kg)
- 190
- Machine external dimensions (LxWxH)
- 920 x 550 x 1560 mm
- Chimney diameter
- 160 mm
- Blowpipe diameter
- 2 x 180 mm
- Firebox dimensions LxWxH
- 500 x 400 x 590 mm
- Dry wood consumption (kg/h)
- 7,5
Related products
Fabbri heaters are designed for supplementary heating of larger premises such as warehouses, industrial halls, joinery workshops, etc. up to 350 m2. They work by blowing hot air into the room through distribution ducts.
The heater is designed for supplementary heating of premises up to 1,000 m2 or 5,000 m3. It works by blowing hot air into the room through distribution ducts.
Heater for supplementary heating of premises such as industrial halls, warehouses, joinery workshops, etc. up to 500 m2. It works by blowing hot air into the room through distribution ducts.
