Edge bender KE-710BTC4

Characteristic Features of the Edge bender KE-710BTC4

• Upper glue container with pre-melting system and automatic pneumatic filling of granular glue from a special hopper.
• Servo magazine for edge banding in 4 positions.
• Belt conveyor.
• Reconfiguration of the servo milling and scraping unit from the control panel.
• Integrated ability to automatically reconfigure the feed to the size set on the control panel using an encoder.
• Corner contouring with two motors.
• The machine operates 24 hours a day without stopping and process 3,500–4,000 linear meters per shift.
• High feed speed of up to 24 m/min.
• Personal computer for controlling machine functions via a "touch screen".
• Integrated waypoint control for contactless operation of process units.
• Possibility to program technological pauses.
• Individual frequency inverter for each working unit.
• Preheating lamp for the front side of the workpiece.
• Lighting inside the protective cabin.
• Limit switches on the doors of the protective cabin.
• Pneumatic shield on the glue roller prevents it from getting dirty.
• Adjustment of front and rear overhangs from the control panel.
• Designed according to CE standards.

The machine is equipped with two fluid application units:

1. First unit for applying separating fluid: using 2 nozzles before the pre-milling unit (milling) of the workpiece. This is done by applying a special separating fluid to prevent excess glue from contacting the workpiece.

2. Second unit for applying polishing fluid: using 2 nozzles before the polishing unit. This is a cleaning fluid. Its main role is to remove the initially applied anti-adhesive (separating fluid) and loose glue residues, as well as to add shine to the finished edge of the part.

Technical Specifications of KE-710BTC4 Edge Banding Machine

• Feed speed: 15–24 m/min
• Machine units:
• Jointing unit
• Servo edge magazine with 4 positions
• Clamping unit
• End trimming unit
• Milling unit for overhang removal
• Contouring unit (corner rounding)
• Scraping unit with radius knives
• Scraping unit with straight knives
• Polishing unit
• Minimum workpiece size: 120 x 95 mm
• Edge thickness: 0.4–3 mm
• Workpiece thickness: 10–60 mm
• Minimum workpiece width: ≥ 95 mm
• Minimum workpiece length: ≥ 120 mm
• Total power: 21 kW
• Working pressure: 0.6 MPa
• Machine dimensions (L x W x H): 6200 x 940 x 1960 mm
• Machine weight: 2600 kg