English
Slovenski
Hrvatski
Hot air generator FABBRI F350
Heater for supplementary heating of larger premises such as industrial halls, warehouses, workshops, etc. Thanks to its high output (over 400 kW), it is suitable for heating premises up to 1,800 m2 or 8,000 m3.
Hot air generator F350
Suitable for rooms up to 1,800 m2 or a volume of 8,000 m3.
The heater is used mainly for supplementary heating of workshops, production halls, warehouses, industrial halls. The advantage of the system is fast room heating – once lit, the room warms up in less than 30 minutes.
It can burn solid fuels, such as wood waste, shavings, briquettes, chips,...
WHY CHOOSE A HOT AIR GENERATOR?
- Low initial investment
- No radiators or plumbing needed
- Can burn wood waste, shavings and briquettes
- Much lower heating costs compared to heating oil or gas
- The room warms up very quickly
- Heat can be transferred to other rooms by extending the outlet ducts!
HEATERS AVAILABLE IN VARIOUS SIZES:
For all information and an immediate offer, call or email us:
+386 1 561 05 30 or info@lestroj.si
PARTS
01 – Hot air outlet ducts/nozzles
02 – Upper combustion chamber door
03 – Lower combustion chamber door for cleaning the firebox before reuse
04 – Welded iron grate in the firebox
05 – Protective grille on the fresh air fan
06 – Programmer for switching the blower on/off
07 – Upper cover of the heating chamber for easier cleaning
08* – Draught fan for forced extraction of flue gases. It provides faster fresh air supply, enabling faster combustion.
*The draught fan is fitted as standard on heaters from F120 upwards. For heaters 28 / 55 / 85 it can be ordered at extra cost.
