English
Slovenski
Hrvatski
€44.03
€51.80
The three-faced cutter spiral upcut bit HWM CMT is used on both hand-held router machines and CNC machines.
STARK rabbeting head PH79FM D50x80
Brand:
The rabbeting head for cutting rabbets and trimming all types of wood and wood composites. It is intended to be used on CNC machines.
Limited time offer:
€340.30
€415.00
-18%
Condition
New product
Reference:
018951
The rabbeting double-faced cutter router bit is used for making rabbets and trimming solid wood, wood composite materials and similar.
The rabbeting head has standard interchangeable blades and HW scoring blades.
Spare parts:
– blade: 50 × 12 × 1.5 mm (C020M50012AB);
– blade: 14 × 14 × 2 mm (C040M14020AA);
– wedge: 46 × 10 × 10 mm (ETASS46);
– screw: M6 × 8 mm (WV001);
– screw: M5 × 8 mm (WV013).
Related products
€638.10
The CMT adjustable chamfer cutter with two interchangeable HW blades for cutting workpieces at an angle ranging from 45° to ± +90°. It is possible to adjust the blade angle at intervals of 7.5 degrees.
€630.70
The CMT set for CNC profiling and engraving with interchangeable blades is intended for profiling and engraving solid wood and wood composite materials.
€372.00
The rabbeting head for cutting rabbets and trimming all types of wood and wood composites. It is intended to be used on CNC machines.
€141.80
The CMT cutter head with an interchangeable blade is used for making V-grooves and processing external edges in solid wood and wood composite materials.
