Cookie preferences
English
Slovenščina 
Hrvatski 
€108.00
The HSK taper is suitable to be used in all conventional CNC machines for clamping the EOC 25 collets.
With arbor HSK CMT 183.360
The HSK taper is suitable to be used in all conventional CNC machines, and it is suitable for clamping the cutter heads up to the height of 100 and 150 mm.
€105.00
Reference:
003001
The HSK taper with an arbor is manufactured at the CMT company in Italy.
The taper has the HSK-63F shank, and it is suitable for the following CNC machines: Homag, Elma from 9/94, Dubus, Weeke, Biesse, SCM, Morbidelli and Masterwood.
The taper with an arbor is intended for clamping the cutter heads for processing on CNC machines.
Other product combination
| Model | Shank diameter (S) | Diameter x Total length (DxL) | Unit price | Buy | Avail. |
|---|---|---|---|---|---|
| 183.360.00 | HSK-63F | 30x100 mm |
€105.00
|
Call us
|
|
| 183.360.10 | HSK-63F | 30x150 mm |
€168.20
|
Call us
|
|
| 183.361.00 | HSK-63F | 35x100 mm |
€140.60
|
|
Product is available Product is no longer in stock
Product is no in stock, but is allowed to be back-ordered
Related products
€69.00
The HSK taper is suitable to be used in all conventional CNC machines for clamping the ER 40 collets.
Limited special offer
€71.72
€75.50
The CMT diamond straight HW router bit is intended to be used on both CNC machines and hand-held router machines.
Limited special offer
€83.31
€87.70
The CMT diamond router bit is intended to be used on CNC machines for trimming, making grooves and similar. The cutter has positive and negative toothing which allows us to grind coated materials without jamming.
Limited special offer
€730.84
€769.30
The CMT 694.015 cutter head is used for making conventional solid interior doors with thickness up to 48 mm.
€1,020.00
The CNC set for processing doors with thickness ranging from 36 to 56 mm in a single pass.
