Laser engraving machine HS-9060 - 2018
3rd generation laser engraving machine with significant improvements: new guides, better motors, higher-quality ball screws. Various work table sizes, laser tubes,... are available.
LASER ENGRAVING/CUTTING is a process in which a powerful laser source directs a laser beam through a suitable lens onto the material and cuts it by the resulting heat. If the beam power is reduced appropriately, the same laser source can also engrave text, images or patterns into a wide variety of materials.
ENGRAVING
A CO2 laser can engrave a wide variety of materials such as wood, plastic, paper, fabric, acrylic, rubber and cardboard. It can also engrave more demanding materials: glass, ceramics, stone and anodised metals.
CUTTING:
Laser cutting is simple, but the heat produces a darker "burnt" edge (when processing wood). The thicker/more demanding the material, the more pronounced the burn. The thickness that can be cut depends on the laser tube power, the material and the lens.
MACHINE ADVANTAGES:
· Wide range of materials: plexiglass, acrylic, leather, foam materials, glass, wood-based materials
· Engraving and cutting of the most complex shapes
· No additional costs – no expensive cutting tools are needed
· Computer connection via USB cable or Wi-Fi
TECHNICAL DATA:
- Laser tube power: 90 W
- Laser tube power (optional): 130 W
- Available working dimensions:
60 x 40 / 90 x 60 / 130 x 90 and 160 x 100 cm
- Workpiece height for engraving: 320 mm
- Minimum engraving size 1.5 x 1.5 mm
- Cutting thickness depends on the material
- Water cooling of the tube via quality cooling systems
- Honeycomb work table (optional)
- Electric raising/lowering, power and motion compensation of the laser
- LCD display, integration with CorelDraw, AutoCAD,…
- Supported formats: PLT, DXF, BMP, JPG, GIF, PNG, TIF,...
INCLUDED EQUIPMENT:
The laser machine comes with the following equipment:
- small air compressor
- extraction system for fumes produced during processing (without filter)
- standard work table with replaceable slats
- work table lighting
- RED-DOT pointer
- Wi-Fi interface for wireless connection
TECHNICAL SUPPORT:
Every customer of HS series laser machines receives training before use (approx. 3 hours) and delivery/installation of the machine. Spare parts are mostly in stock or quickly available. Our service technicians are also available for more demanding work.
Data sheet
- Worktable dimension (mm)
- 900 x 600
- Weight (kg)
- 100 - 500
- Working height (mm)
- od 100 do 320
Dvig spust mize preko enega jermena
| Model |
|---|
| — |
| — |
| — |
| — |




















