Scoring blades


The scoring saw blades are used for the high-quality cutting of wood composite materials, which are enriched with melamine films, PVC films and laminates. Before the main saw blade cuts into the panel, the scoring saw blade cuts a groove, so that the tooth of the primary saw blade does not tear the lower side of the panel upon the exit. The scoring saw blade groove must be 1–2 mm deep and 0.1–0.2 mm wider than the main rip saw blade. The scoring saw blades have small diameters, and their advantage is that they rotate in the opposite direction than the primary saw blade. The diameter of the saw blades ranges from 70 to 200 mm. They are made of quality steel and hard metal.

With the conical scoring saw blades, we can set the kerf width by raising and lowering the blade. The diameters of saw blades range from 80 to 200 mm, while the kerf thickness can be set from 3.1 to 4.3 mm or, in the...
The flat tooth scoring saw blades are intended to be used with main saw blades of the same width as the scoring saw blade. The diameter of the scoring saw blade is 120 mm, and the thickness is 3.2 mm.
Showing 1-4 of 4 item(s)