Cutting head adjustable CMT 694.005 R4/45° H18-50 mm

The CMT cutter head set is made of lightweight aluminium alloy. It is equipped with HW blade with the possibility of processing the edge at a 45° angle and a radius of 4 mm. Using the spacers, it is very easy to adjust the cutter head according to the workpiece thickness.

The 2-piece grooving cutter head is suitable for use on conventional router machines.

The cutter head is delivered in a strong plastic case.

The 694.005 set includes:
⎻    cutter head,
⎻    two upper blades R4 mm / 45° 20 × 20.5 × 2 mm (695.005.A4),
⎻    two lower blades R4 mm / 45° 20 × 20.5 × 2 mm (695.005.B4),
⎻    two upright blades 50 × 12 × 1.5 mm (790.500.00),
⎻    21 spacers (695.998.11–695.998.15).

Technical data of 694.005:
⎻    cutter diameter: 139 mm;
⎻    working height: 18–50 mm;
⎻    possibility of rounding R4 mm and at a 45° angle;
⎻    borehole diameter: 30 or 35 mm.

Additional blades (option to buy):
⎻    two upper blades R2 mm / 45° 20 × 20.5 × 2 mm (695.005.A2),
⎻    two lower blades R2 mm / 45° 20 × 20.5 × 2 mm (695.005.B2),
⎻    two upper blades R3 mm / 45° 20 × 20.5 × 2 mm (695.005.A3),
⎻    two lower blades R3 mm / 45° 20 × 20.5 × 2 mm (695.005.B3),
⎻    two upper blades R5 mm / 45° 20 × 20.5 × 2 mm (695.005.A5),
⎻    two lower blades R5 mm / 45° 20 × 20.5 × 2 mm (695.005.B5),
⎻    two upper blades R6 mm / 45° 20 × 20.5 × 2 mm (695.005.A6),
⎻    two lower blades R6 mm / 45° 20 × 20.5 × 2 mm (695.005.B6).